With $100 of planned risk and a 10-point stop, the maximum is 5 MNQ contracts or 0 NQ contracts, before commissions, fees and slippage. One MNQ contract risks $20 over that distance. One NQ contract risks $200. The same chart distance produces very different dollar exposure.

If you arrived looking for a futures position size calculator or an NQ contract position size calculator, this page explains the arithmetic by hand. The current Position Size Calculator estimates dollar-denominated stock shares or units without a contract multiplier. It does not convert futures prices into contract counts. This article is an explainer, not a futures contract calculator.

What a point and a tick are worth

A point is a one-unit move in the quoted index price: from 20,000 to 20,001, for example. Point value tells you how many dollars that move gains or loses for one contract. A tick is the smallest quoted price increment for the outright futures contract. Its dollar value is the tick size multiplied by the point value.

The figures below follow CME's published specifications for E-mini Nasdaq-100 futures (NQ) and Micro E-mini Nasdaq-100 futures (MNQ), checked on 2026-11-09.

ContractContract multiplier / point valueMinimum tickDollar value of one tick
NQ — E-mini Nasdaq-100$20 × index; $20 per point per contract0.25 point$5 per contract
MNQ — Micro E-mini Nasdaq-100$2 × index; $2 per point per contract0.25 point$0.50 per contract

Both contracts have four ticks to a point. A 10-point stop is therefore 40 ticks, not 10 ticks. For NQ, 40 × $5 = $200 per contract; for MNQ, 40 × $0.50 = $20.

Ten MNQ contracts have the same $20-per-point exposure as one NQ contract. That is the sense in which ten MNQ are approximately one NQ. It does not make their total commissions, margin requirements or execution identical.

From dollar risk to whole contracts

For a positive stop distance and point value, with a nonnegative dollar risk budget:

contracts = floor( dollar_risk / (stop_points × point_value) )

Here, stop_points is the absolute distance between entry and the planned stop, measured in index points. point_value is dollars per point for one contract. Their product is the planned price loss on one contract if the exit fills at the stop. floor means round down to a whole number: a result of 2.5 allows two contracts under the stated budget, not three.

The equivalent calculation in ticks is floor( dollar_risk / (stop_ticks × tick_value) ). Use points with point value, or ticks with tick value. Mixing the two makes the answer wrong by a factor of four for NQ and MNQ.

This is a risk condition, not a recommendation to take the maximum size. It excludes trading costs and assumes the stop fills at its stated price. A zero stop distance cannot produce a meaningful position size.

How many micro contracts for $100 risk in MNQ?

The stop distance is the missing input. With a 10-point stop, the calculation is:

  • Risk per MNQ contract: 10 points × $2 per point = $20.
  • Contract count: floor($100 ÷ $20) = 5 MNQ.
  • Planned price loss at the stop: 5 × $20 = $100, before costs.

For example, a hypothetical long entry at 20,000 and a stop at 19,990 are 10 points apart. The calculation is the same for a hypothetical short entry at 20,000 and a stop at 20,010. Direction changes which move loses money, but not the absolute distance used here.

Changing the stop changes the answer:

Stop distanceRisk per MNQMaximum MNQ for $100Planned price loss
5 points$1010$100
10 points$205$100
20 points$402$80
25 points$502$100

At 20 points, the unused $20 is a consequence of whole contracts. A third MNQ would bring planned price loss to $120 and exceed the budget.

Now keep the $100 budget and 10-point stop, but change the contract to NQ. Risk per contract becomes 10 × $20 = $200. The answer is floor($100 ÷ $200) = 0 NQ. Half an NQ is not a tradable contract quantity, and rounding up to one doubles the specified risk.

This mismatch explains why smaller budgets often lead to considering MNQ. Mathematically, fitting one NQ would instead require a budget of at least $200 at a 10-point stop, or a stop of at most 5 points at a $100 budget, before costs. Those are changes to the assumptions, not fixes to the formula. A larger risk budget increases the possible loss; a tighter stop changes where the trade exits. Neither follows as advice from this calculation. Keeping the original assumptions simply leaves the NQ count at zero.

What the number leaves out

Five MNQ use the entire $100 budget for the price move alone. If $100 is meant to include costs, the allowance for round-trip commissions, fees and adverse fills must also fit. For illustration only, adding a hypothetical $2 cost allowance per contract changes the denominator to $22: floor($100 ÷ $22) = 4 MNQ, with $88 of modeled loss including that allowance. The $2 is an arithmetic assumption, not a broker fee quote or a bound on slippage. A stop order cannot guarantee the final loss.

Margin answers a separate question: how much collateral is required to hold the position. It does not replace the stop-distance calculation or establish a maximum loss. Prop-account constraints are separate too. The Trailing Drawdown Calculator and Prop Firm Calculator cover drawdown and evaluation scenarios; a contract count alone does not establish compliance with those limits.

For ordinary stock or dollar-per-unit examples, the Position Size Calculator shows how a risk budget relates to entry and stop prices. It has no NQ/MNQ multiplier input, so entering futures index prices there does not yield a valid futures contract count.

To practice identifying entry and stop locations on historical NQ sessions, see PositionLab · NQ Replay. The point-to-dollar calculation above gives those distances a common risk unit for review. Simulation practice and a correct size calculation do not establish that a trade has an edge.

By Eliza. Educational arithmetic only, not investment advice. All trade prices and risk budgets here are hypothetical.